Supreme Motorcycle Gel Pad


Go to content

Motorcycle Gel Pads

Fitting Instructions

Fitting a Supreme Comfort Seat Motorcycle Gel Pad or Pillion Gel Pad couldn't be easier. The gel comes inside a hardwearing and easy to clean neoprene cover. The base of the pad is made of high quality non-slip material. Once your weight is on the pad it is virtually impossible for it to move. However, all of our pads come with securing straps to ensure they stay in place when climbing on and off your motorcycle.

Our pads offer great flexibility in how you can fit them.
Here are two recommended methods:

Fitting Instructions: Using 'Anchor Loop To Frame' System

  • Position the gel pad on your seat with the non-slip side facing downwards and the securing loops hanging down the side of your motorcycle.
  • Confirm pad position is correct for riding by sitting on the pad.
  • Locate suitable anchor points on your bike to attach anchor loops. NB Frame tubing or seat mounting lugs under the seat are the usual places.
  • Unclip the anchor loops from the longer part of each securing strap.
  • Attach both anchor loops to your chosen anchor points. Do this by passing the looped end of each strap around the back of the anchor point then thread the buckle end through the loop. Pull tight.
  • Clip both long securing straps back to the anchor loops. Pull each side of the main security straps evenly until the pad is firmly held in place. NB Do not over tighten... remember, the security straps are only provided to locate the gel pad when you are climbing on and off your motorcycle.


Fitting Instructions: Using 'Wrap Under Seat' System

If no suitable frame or metalwork can be found to attach the supplied anchor loops to, use the following method::

  • Remove one female ended buckle from a anchor loop and rethread it onto one of the gel pad's main security straps in the place of one male buckle). Your gel pad's main security straps will now have one male buckle and one female buckle.
  • Position the Supreme Comfort Seat pad on your seat with the non-slip woven side facing downwards and the securing loops hanging down the side of your motorcycle.
  • Confirm pad position is correct for riding by sitting on the pad.
  • Position the main security straps under your motorcycle's seat. Clip them together to form one complete securing strap under the seat.
  • Pull each side of the main security straps evenly until the pad is firmly held in place. NB Do not over tighten... remember, the security straps are only provided to locate the gel pad when you are climbing on and off your motorcycle.


NB All webbing used on our gel pads is NATO approved. Excess strapping can be cut off with scissors. However, if you have more than one motorcycle and wish to swap the pad between machines, ensure that the strap length is long enough for each motorcycle before trimming. Always singe the end of webbing that has been trimmed to prevent fraying.


Supreme Comfort Seat 2012. All rights reserved. | info@motorcyclegelpad.co.uk

Back to content | Back to main menu